Australia markets close in 5 hours 27 minutes
  • ALL ORDS

    6,853.30
    +6.00 (+0.09%)
     
  • ASX 200

    6,622.00
    +6.70 (+0.10%)
     
  • AUD/USD

    0.7444
    +0.0027 (+0.36%)
     
  • OIL

    45.66
    +0.02 (+0.04%)
     
  • GOLD

    1,844.70
    +3.60 (+0.20%)
     
  • BTC-AUD

    26,138.48
    +582.67 (+2.28%)
     
  • CMC Crypto 200

    382.19
    +7.79 (+2.08%)
     
  • AUD/EUR

    0.6125
    +0.0005 (+0.09%)
     
  • AUD/NZD

    1.0517
    +0.0032 (+0.31%)
     
  • NZX 50

    12,667.74
    +18.83 (+0.15%)
     
  • NASDAQ

    12,467.13
    +10.72 (+0.09%)
     
  • FTSE

    6,490.27
    +26.88 (+0.42%)
     
  • Dow Jones

    29,969.52
    +85.73 (+0.29%)
     
  • DAX

    13,252.86
    -60.34 (-0.45%)
     
  • Hang Seng

    26,728.50
    +195.92 (+0.74%)
     
  • NIKKEI 225

    26,809.37
    +8.39 (+0.03%)
     

The guy who built his own smartwatch is back with a pair of GPS smart glasses

Daniel Cooper
·Senior Editor
·2-min read

What does a product designer do in their downtime during a pandemic in which most leisure activities are verboten? If you’re Samson “smarchbme” March, then you build a pair of smart sunglasses as an accessory to the homemade smartwatch you’ve already built. The engineer has created his own pair of shades which help him navigate around unfamiliar locales without the need to stare at his phone screen.

Inspired by that Ferris Bueller quote about taking the time to look around, March wanted a smarter way of walking around around cities. The glasses work by flashing a blue light in the left or right eyepiece, depending on when you need to make a turn. When you reach your destination, a green light in the corresponding eyepiece to direct you to the front door.

This wasn’t as simple as just building a device that pairs with your phone, since it needed to be accurate on the street level. March wound up designing his own iPhone app that could offer fine-grain turn directions that would help him get around at street level. It’s his first app, built in Swift, and March told Engadget that the experience was “a delight.”

Hardware-wise, the frames are CNC machined out of bamboo, with holes in the arms to house a pair of printed circuit boards and a coin battery. March also made his own lenses and polished them through, a level of dedication that itself deserves a round of applause. March said that the project, which he started in early September, took around 40 hours total, plus another 20 for the CNC machine to run.

Much like before, March is publishing all of the instructions necessary, at GitHub, for sufficiently-motivated engineers to make their own smart glasses. He said that, all in, the cost of components should come to around $20, and has even posted retail links to order the printed circuit boards that he designed. And, to be honest, they seem like a much smarter use for smart glasses technology than we’ve seen from other companies recently.