Australia markets closed
  • ALL ORDS

    6,762.40
    +71.00 (+1.06%)
     
  • ASX 200

    6,578.70
    +50.30 (+0.77%)
     
  • AUD/USD

    0.6952
    +0.0053 (+0.77%)
     
  • OIL

    107.06
    +2.79 (+2.68%)
     
  • GOLD

    1,828.10
    -1.70 (-0.09%)
     
  • BTC-AUD

    30,744.69
    +400.71 (+1.32%)
     
  • CMC Crypto 200

    462.12
    +8.22 (+1.81%)
     
  • AUD/EUR

    0.6582
    +0.0032 (+0.49%)
     
  • AUD/NZD

    1.0996
    +0.0016 (+0.14%)
     
  • NZX 50

    10,813.92
    +135.25 (+1.27%)
     
  • NASDAQ

    12,105.85
    +408.17 (+3.49%)
     
  • FTSE

    7,208.81
    +188.36 (+2.68%)
     
  • Dow Jones

    31,500.68
    +823.32 (+2.68%)
     
  • DAX

    13,118.13
    +205.54 (+1.59%)
     
  • Hang Seng

    21,719.06
    +445.19 (+2.09%)
     
  • NIKKEI 225

    26,491.97
    +320.72 (+1.23%)
     

Drilling is underway at the Hecla-Kilmer copper-gold breccia target with critical metals in northern Ontario

  • Oops!
    Something went wrong.
    Please try again later.
·12-min read
In this article:
  • Oops!
    Something went wrong.
    Please try again later.
VR Resources
VR Resources

Figure 1

Shown schematically in dashed white lines are drill holes planned for 2022 to test the new AS magnetic highs derived from the recently completed, high resolution drone-based magnetic survey, and located in the eastern part of the gravity anomaly, the core of which was the focus of drilling in 2020 and 2021.
Shown schematically in dashed white lines are drill holes planned for 2022 to test the new AS magnetic highs derived from the recently completed, high resolution drone-based magnetic survey, and located in the eastern part of the gravity anomaly, the core of which was the focus of drilling in 2020 and 2021.

Figure 2a

Plan map with the 3D MVI magnetic inversion model superimposed on the RTP magnetic base map, both derived from the regional HighSense airborne magnetic survey in 1993.  Shown are the locations of drill holes completed to date by VR, and those planned in follow-up for 2022.  See Figure 1 for details of drilling planned for the northern MVI anomaly. See Figure 2b for an oblique, north-south cross-section through the MVI magnetic model.
Plan map with the 3D MVI magnetic inversion model superimposed on the RTP magnetic base map, both derived from the regional HighSense airborne magnetic survey in 1993. Shown are the locations of drill holes completed to date by VR, and those planned in follow-up for 2022. See Figure 1 for details of drilling planned for the northern MVI anomaly. See Figure 2b for an oblique, north-south cross-section through the MVI magnetic model.

Figure 2b

Oblique north-south cross section through the MVI magnetic anomaly shown on the plan map in Figure 2a.  Shown are the drill holes completed by VR on the northern MVI magnetic anomaly in 2020 and 2021, and those planned for 2022 in the southern MVI anomaly (white traces).  The MVI 3D inversion model is derived from the HighSense regional airborne magnetic survey in 1993.
Oblique north-south cross section through the MVI magnetic anomaly shown on the plan map in Figure 2a. Shown are the drill holes completed by VR on the northern MVI magnetic anomaly in 2020 and 2021, and those planned for 2022 in the southern MVI anomaly (white traces). The MVI 3D inversion model is derived from the HighSense regional airborne magnetic survey in 1993.

VANCOUVER, British Columbia, April 20, 2022 (GLOBE NEWSWIRE) -- VR Resources Ltd. (TSX.V: VRR, FSE: 5VR; OTCQB: VRRCF), the "Company", or “VR”, is pleased to announce that drilling is underway at its Hecla-Kilmer (“H-K”) property and large-footprint copper-gold breccia target with critical metals located in northern Ontario.

The Program
Four to six drill holes are planned on four new, and separate magnetic anomalies derived from the recently completed drone survey. Drilling should take approximately six weeks to complete, with assay data from geochemical sampling expected by July, if not June.

The exploration camp is once again fully established on private land at Otter Rapids located just 23 km southeast of the property. The camp is serviced by Highway 634 which links the hydro electric facility at Otter Rapids to the towns of Cochrane and Kapuskasing located to the south along the northern Trans-Canada Highway. The Ontario Northern Railway also passes through Otter Rapids to service the communities of Moose Factory and Moosonee located on the tidewaters of James Bay.

The Targets
The program has two components, illustrated in Figures 1 and 2 respectively:

  • Figure 1. The first four holes of the program will test the new AS magnetic highs derived from the recently completed, ultra- high resolution drone magnetic survey. They are located on the eastern flank of the gravity anomaly which was the focus of drilling in 2020 and 2021;

  • Figure 2. Plan map and cross-section showing the 3D MVI inversion of the regional magnetic data which covers the H-K complex. The two holes planned for the second half of the program are shown on both map and section; they target MVI anomalies located in the central core and southern margin of the complex, some 2-3 km to the south of the previous drilling.

This is the company’s third reconnaissance drill program at H-K. In 2020, VR discovered a carbonate-fluorite hydrothermal breccia system which comes to bedrock surface and has more than 600 metres of vertical extent. It is hosted within, and is overprinted by ultra-high temperature, sulfide-bearing calc-potassic alteration. Follow-up drilling in 2021 intersected up to 299 m of rare earth elements and critical metals, and importantly, confirmed the presence of elevated gold along controlling structures.

By using the new AS magnetic anomalies derived from the new drone airborne survey as an indication of higher concentrations of hydrothermal magnetite, the objective of this third drill program is twofold:

  1. Test the new AS magnetic peaks immediately to the east of VR’s previous drilling for copper and gold, and/or, critical metals in higher concentrations than those intersected in 2020 and 2021;

  2. Test the central core and southern rim of the H-K complex for new centers of copper-gold breccia; neither target has been previously drilled.

From VR’s CEO, Dr. Michael Gunning, “It is good to have the drill turning at Hecla-Kilmer while we wait for the geochemical results from our recently completed first-pass drill program at our Amsel gold-silver target in Nevada, which we still expect to receive in the next few weeks. The drone magnetic survey completed last fall and expanded this spring has certainly provided us with the obvious vector for how to follow up on the broad intersections of critical metals made last year, and we are excited to test the new targets in follow-up to what our drilling has discovered so far.

To be clear, our drilling remains early-stage for a complex of this size. The point of Figure 1 is to emphasize that we have only just started to identify, understand and explore the specific controls on the various styles of mineralization intersected to date in the northern part of the complex. The new AS magnetic anomalies that we plan to drill are potentially the center of the hydrothermal breccia system discovered in our initial drilling. The point of Figure 2 is simply to make clear just how much larger the southern MVI inversion anomaly located on the south rim of the H-K complex is. It has never been previously drilled.

Given the intensity of hydrothermal brecciation, sulfide alteration and critical metal mineralization that we have intersected to date at H-K, we are excited to see what the four new drone-magnetic targets deliver in drill core in this next round of drilling. Indeed, this program will give us our first look across the breadth of the 4-6 km complex, and we look forward to providing further updates as our drilling advances.”

Background

Hecla-Kilmer (“H-K”) is a large and multiphase alkaline intrusive complex with carbonatite. It is 4 – 6 km in size, Proterozoic in age, and was emplaced along the western margin of the crustal-scale Kapuskasing structural zone which bisects the Archean Superior Craton in northern Ontario.

A shallow, six-hole diamond drill program was completed in 1970 as part of a regional base metal exploration program by Ashland Oil and Elgin Petroleum. One hole was abandoned, and a scant 854 m were completed in total in the other five holes, all on magnetic highs in the outer concentric zones of the complex. No geochemical sampling or data are reported. Selco Exploration Company completed two drill holes in 1981 on peripheral magnetic highs as part of a regional diamond exploration program; they intersected altered ultra-basic rocks and black breccia in the outer, concentric zones of the multiphase complex at H-K. After this historical drilling, a regional airborne magnetic survey was completed in 1993 for ongoing diamond exploration, and it provided a high-resolution of detail for the entire H-K complex.

The opportunity for VR is to be the first company to apply modern IOCG and carbonatite mineral deposit models to explore the multiphase H-K complex and hydrothermal breccia system as a whole, and to use new exploration technologies not previously available when the historic drilling was done.

VR completed the first airborne EM survey over H-K in June, 2020, using the state-of-the-art VTEM+ system of Geotech Ltd. Flown at 100 m line spacing over a 6 x 7 km survey block for a total of 450 line-km, the data provide a high resolution of detail. The Company also completed an independent, 3-D inversion of both magnetic and EM data, for improved modeling of the complex in three dimensions. A detailed, ground-based gravity survey covering an area of 1.5 x 3.5 km was completed in the winter season of 2021, with high-resolution data generated from 597 stations on an equant grid spacing of 100 m.

VR completed four drill holes for a total of 1,971 m in October, 2020, targeting the northern MVI (magnetic inversion) anomaly at H-K. In October, 2021, the Company followed up that drilling with the completion of 5 additional holes for a total of 2,604m, targeting the high contrast, 3.5 mGal gravity anomaly that is co-spatial with, but slightly offset from the MVI magnetic anomaly. Fluorite-carbonate hydrothermal breccia was discovered, coming to surface and hosted in a high temperature, sulfide-bearing calc-potassic alteration system, and containing broad intersections up to 299 m long of critical metals, with copper and gold locally. There are four different styles of mineralization evident: 1. REE’s and critical metals in hydrothermal breccia veined and brecciated carbonatite dykes (Holes 2, 4, 5, 8 and 9); 2. lithium mineralization in hydrothermal breccia (Holes 2 and 9); 3. copper sulfide in veinlets with iron and silica (Hole 2), and; 4. elevated hydrothermal gold related to syenite porphyry dykes (Holes 2, 6, 8 and 9).

A state-of-the-art, ultra- high resolution drone magnetic survey was completed in the fall of 2021, and expanded in March of 2022, in order to: 1. cover the entire complex at H-K, and; 2. identify vectors for how best to follow up on the hydrothermal breccia intersections with critical metals and gold in the first two drill programs. The final survey is 3.4 x 4.5 km in size, comprising 121 lines at both 25 and 50 m line-spacing for a total of 410 line-km. The survey produces a very high resolution of data because of the tight line spacing, the low “tree-top” flight altitude of just 30 metres above ground, and a computerized flight control paired with a new, very high sensitivity potassium-vapour magnetometer.

Going forward, the third drill program planned for the spring of 2022 will test new drone AS magnetic anomalies located immediately to the east of the sulfide-bearing breccia intersected in 2020 and 2021, and test the larger and more deeply rooted MVI magnetic anomalies located 2 – 3 km to the south in the central core and southern rim of the complex, and which have never been drilled before, period.

Technical Information

Summary technical and geological information for the Company’s various exploration properties is available at the Company’s website at www.vrr.ca.

VR submitted all drill core for GeologicAI XRF and SWIR scanning, and selected sawn drill core samples for geochemical assay to the ALS Global Ltd. (“ALS”) laboratory facilities in Timmins, Ontario, with final geochemical analytical work done at the ALS laboratory located in North Vancouver, BC., including lithium borate fusion, ICP-MS and ICP-AES analyses for base metals, trace elements and full-suite REE analysis, and gold determination by atomic absorption on fire assay. Analytical results are subject to industry-standard and NI 43-101 compliant QAQC sample procedures externally by the Company and internally at the laboratory as described by ALS.

Technical information for this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101. Justin Daley, P.Geo., Exploration Manager and Chief Geologist at VR and a non-independent Qualified Person oversees and/or participates in all aspects of the Company’s mineral exploration projects, and the content of this news release has been reviewed on behalf of the Company by the CEO, Dr. Michael Gunning, P.Geo., a non-independent Qualified Person.

About the Hecla-Kilmer Property

The Hecla-Kilmer complex is located 23 km northwest of the Ontario hydro-electric facility at Otter Rapids, the Ontario Northland Railway, and the northern terminus of Highway 634 which links the region to the towns of Cochrane and Kapuskasing to the south, located on the northern Trans-Canada Highway.

The H-K property is large. It consists of 224 mineral claims in one contiguous block approximately 6 x 7 km in size and covering 4,617 hectares. The property is owned 100% by VR. There are no underlying annual lease payments on the property, nor are there any joint venture or back-in interests. There is an industry-standard royalty attached to the property, including a buy-back provision in favour of VR.

Like the Ranoke property, H-K is located on provincial crown land, with mineral rights administered by the Ontario Ministry of Northern Development, Mines, Natural Resources and Forestry (“MNDM”). There are no annual payments, but the MNDM requires certain annual exploration expenditures and reporting. The property falls within the traditional territories of the Moose Cree and Taykwa Tagamou First Nations.

About VR Resources

VR is an established junior exploration company focused on greenfields opportunities in copper, gold and critical metals (TSX.V: VRR; Frankfurt: 5VR; OTCQB: VRRCF). VR is the continuance of 4 years of active exploration in Nevada by a Vancouver-based private company. The diverse experience and proven track record of its Board in early-stage exploration, discovery and M&A is the foundation of VR. The Company focuses on underexplored, large-footprint mineral systems in the western United States and Canada, and is well-financed for its exploration strategies and corporate obligations. VR owns its properties outright and evaluates new opportunities on an ongoing basis, whether by staking or acquisition.

The Company continues its normal course of business in 2022 within the framework of modified exploration programs in response to the COVID-19 pandemic, with the goal of ensuring the health and safety of staff and project personnel.

ON BEHALF OF THE BOARD OF DIRECTORS:

“Michael H. Gunning”
____________________________

Dr. Michael H. Gunning, PhD, PGeo
President & CEO

For general information please use the following:

Website: www.vrr.ca
Email: info@vrr.ca
Phone: 604-262-1104

Forward Looking Statements

This press release contains forward-looking statements. Forward-looking statements are typically identified by words such as: believe, expect, anticipate, intend, estimate, postulate and similar expressions or those which, by their nature, refer to future events. Forward looking statements in this release include those related to the companies upcoming plans, such as “The new AS magnetic anomalies that we plan to drill are potentially the center of the hydrothermal breccia system discovered in our initial drilling”, and “VR evaluates new opportunities on an ongoing basis, whether by staking or acquisition.”

This news release contains statements and/or information with respect to mineral properties and/or deposits which are adjacent to and/or potentially similar to the Company’s mineral properties, but which the Company has no interest in nor rights to explore. Readers are cautioned that mineral deposits on similar properties are not necessarily indicative of mineral deposits on the Company’s properties.

Although the Company believes that the use of such statements is reasonable, there can be no assurance that such statements will prove to be accurate, and actual results and future events could differ materially from those anticipated in such statements. The Company cautions investors that any forward-looking statements by the Company are not guarantees of future performance, and that actual results may differ materially from those in forward-looking statements. Trading in the securities of the Company should be considered highly speculative. All of the Company’s public disclosure filings may be accessed via www.sedar.com and readers are urged to review these materials. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in Policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Figure 1. Shown schematically in dashed white lines are drill holes planned for 2022 to test the new AS magnetic highs derived from the recently completed, high resolution drone-based magnetic survey, and located in the eastern part of the gravity anomaly, the core of which was the focus of drilling in 2020 and 2021. https://www.globenewswire.com/NewsRoom/AttachmentNg/eb4c8801-1796-4a2c-b466-95539ce87f10

Figure 2a. Plan map with the 3D MVI magnetic inversion model superimposed on the RTP magnetic base map, both derived from the regional HighSense airborne magnetic survey in 1993. Shown are the locations of drill holes completed to date by VR, and those planned in follow-up for 2022. See Figure 1 for details of drilling planned for the northern MVI anomaly. See Figure 2b for an oblique, north-south cross-section through the MVI magnetic model. https://www.globenewswire.com/NewsRoom/AttachmentNg/81d4ffcb-bd73-480a-8c8f-e97d792ce169

Figure 2b. Oblique north-south cross section through the MVI magnetic anomaly shown on the plan map in Figure 2a. Shown are the drill holes completed by VR on the northern MVI magnetic anomaly in 2020 and 2021, and those planned for 2022 in the southern MVI anomaly (white traces). The MVI 3D inversion model is derived from the HighSense regional airborne magnetic survey in 1993. https://www.globenewswire.com/NewsRoom/AttachmentNg/6b5b98a6-6e15-4630-8425-b42bd1991cd1

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in Policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.


Our goal is to create a safe and engaging place for users to connect over interests and passions. In order to improve our community experience, we are temporarily suspending article commenting